Decking Gainsborough
Decking In Gainsborough
We design and build decking in Gainsborough and the surrounding areas, working in timber, Millboard and composite. A new deck extends the space you live in, so we plan each one around structure, usability and finish. As decking installers in Gainsborough, we aim for a practical result that suits the garden. Each project in Gainsborough also starts with a site visit.
We are approved installers for every decking product from Talasey Landscaping Solutions, so each deck goes in using the correct methods. Durability starts with careful ground preparation, then a solid timber or composite subframe. Precise installation then follows, in all conditions. Where a design calls for them, we also fit balustrades, integrated lighting and custom features. See our county decking page for decking across Lincolnshire.
Decking Types We Build In Gainsborough
Across Gainsborough and the surrounding areas, we build decks in composite, Millboard and timber, along with the extras listed below.
Timber Decking In Gainsborough
Timber gives a natural finish with plenty of character, and it suits varied layouts and levels. All our timber arrives pressure-treated so that it resists moisture, decay and ground contact.
Composite Decking In Gainsborough
Composite decking in Gainsborough gives a durable, low-maintenance deck with a clean, modern look. The boards also resist rot, warping, fading and moisture damage.
Millboard Boards And Fixings
Millboard boards are moulded from resin, with a surface cast from real timber and no wood fibre inside. We face fix them using colour-matched screws, and the surface then closes over each screw head.
Raised Decking Where Levels Change
When a back door sits above the garden or the ground falls away, raised decking gives a stable, level surface. We build decking steps to an equal rise and also add balustrades in timber, composite or glass.
Lighting Built Into The Deck
We plan any lighting before a single board goes down. Low-voltage lights sit recessed into boards, step risers or balustrade posts, with the cable running through the subframe.
Decking Repairs In Gainsborough
Repairs begin with the subframe, not the boards. When a deck has moved or a board has failed, we check the frame, then fit replacement boards to match.
Choosing Decking Boards In Gainsborough
Timber decking uses natural wood, either softwood or hardwood, while composite blends recycled plastics with wood fibres. Composite keeps a consistent finish and needs little looking after. Timber, on the other hand, gives a natural look that you can maintain or re-finish.
Upkeep is the clearest difference. Composite usually needs nothing more than an occasional clean, whereas timber may need staining or oiling to protect it from the weather. As garden landscapers in Gainsborough, we then recommend the material that best balances appearance, performance and long-term value.
Both materials come in a wide range of styles, colours and finishes for contemporary or traditional gardens, and composite also comes in solid and woodgrain finishes. Before any work begins in Gainsborough, we bring samples so you can see the textures and colours for yourself.
How Our Decking Installation Works In Gainsborough
Every project in Gainsborough follows the same four stages, so our own team stays with it from the first site visit until the final walk-round.
1Consultation
The first step is a site visit, when we look at the garden, take measurements and talk through what you want from it. Our landscape designers then put forward initial ideas along with a free, no-obligation quote.
2Design & Written Quote
Where the project needs it, we prepare a CAD drawing or a hand-drawn sketch so you can see the layout before anything is built. After that, you receive a written quote that breaks the work down stage by stage.
3Installation
Once you are happy with the quote, we agree a start date and keep you updated as the work progresses. Our team works to strict safety standards, uses quality materials and removes all waste responsibly.
4Handover
When the job is finished, we inspect every part of it with you and walk you round the completed garden. If anything needs adjusting, we sort it before we leave, and the site is left clean and tidy.
Subframes Under Every Gainsborough Deck
Every deck we build in Gainsborough sits on a ventilated subframe. We also set the joist centres to suit the board and take the falls away from the house. So the deck stays stable and level, even over uneven ground, and the garden becomes easier to use every day.
On decks close to the ground, we often use composite subframes, because they add structural stability and cut down on maintenance. We also leave ventilation under the frame to keep it dry. A deck whose surface sits no higher than 30 centimetres normally counts as permitted development. For a higher deck in Gainsborough, we check with the local authority before we quote.
For a deck beside new paving or an artificial lawn, see patios and paving in Gainsborough. The main Gainsborough page lists every service we offer in the area, and we also build decks in Lincoln and Scunthorpe.
Why Gainsborough Homeowners Choose Reshape
When homeowners in Gainsborough compare decking installers, these are the main reasons they choose Reshape Landscaping.
- Established in 2010, with more than four hundred landscaping projects now completed across Gainsborough and Lincolnshire.
- Holders of the Houzz 2026 Best of Service award, judged on customer feedback.
- Our own team handles each stage, from digging the post holes and building the subframe to fitting boards, steps and balustrades.
- Talasey Landscaping Solutions approved installers, and approved by Select Living Group too.
- Winners of the SME News Midlands Enterprise Awards 2026 – Best Bespoke Garden Landscaping Service, Lincolnshire.
- Each deck sits on a ventilated subframe, with joist centres matched to the board and falls running away from the house.
- Prestige Awards 2026/27 winners – Landscaper of the Year, Lincolnshire.
- Fully insured decking contractors, and every job in Gainsborough starts with a written quote covering each stage.
- Lincoln based, with Gainsborough and the surrounding areas part of our everyday working area.
Areas We Cover Around Gainsborough
Decks go up right across Gainsborough and the DN21 postcode, from the long narrow gardens behind the Victorian and Edwardian terraces to the wider plots on the newer estates, and out through the surrounding areas.
Lea and Morton sit just outside the town, with Blyton, Laughton, Scotter, Scotton and Kirton in Lindsey to the north of the town. Corringham, Hemswell and Glentworth lie to the east. Upton, Kexby, Willingham by Stow, Sturton by Stow and Stow lie south of Gainsborough, all within our everyday working area.
We build the same decks in Lincoln, and a deck running into new paving is set out with paving in Gainsborough. The Gainsborough page lists our other work in the town. For decking in Gainsborough or the surrounding areas, get in touch for a site visit and quote, or see all the areas we cover.
Request A Decking Quote In Gainsborough
We carry out decking installation in Gainsborough and the surrounding areas. Each project begins with a consultation and a site visit, and we then provide a written quote covering every stage of the work.
Send us your postcode and a few photos of the garden using the form, or get in touch through our contact page. More of our finished work is also on our projects page.
Our Other Services In Gainsborough
We cover Gainsborough, Lincoln and the surrounding areas. See all areas we cover.
Frequently Asked Questions
Is composite or timber decking better?
Both suit most gardens when designed and installed properly. So the choice comes down to budget, appearance and how much upkeep you are happy with.
What is composite decking made from?
Composite boards blend recycled plastics with wood fibres. Timber decking, by contrast, is natural softwood or hardwood. Composite keeps a consistent finish with little maintenance, while you can maintain or re-finish timber over time.
How much maintenance does timber decking need?
Timber decking may need staining or oiling to protect it from the weather. Composite, by comparison, usually needs only an occasional clean.
What affects the cost of a composite deck?
The price depends on the board type, the subframe, the ground preparation and the size of the area. Composite usually costs more upfront than timber, but it needs far less maintenance afterwards. We also work to a wide range of budgets.
Is planning permission needed for a deck in Gainsborough?
A deck with its surface no more than 30 centimetres above the ground normally counts as permitted development. For anything higher, we check with the local authority before quoting.
Do you cover Gainsborough and nearby areas?
Yes, we build decking in Gainsborough and the surrounding areas. Send a few photos and your postcode through the contact page, and we will then arrange a site visit.