Grey resin driveway installation in Lincoln

Resin Driveways Gainsborough

Grey resin driveway installation in Lincoln

Resin Driveways In Gainsborough

We lay resin driveways in Gainsborough, covering drives, paths and parking areas for homes of every age. Because the finish is clean and modern, it sits well beside older brickwork as well as newer fronts. A resin-bound driveway is also durable and low in maintenance. Our own team handles each driveway installation in Gainsborough from start to finish.


Water drains straight through a resin-bound surface, so the drive stays fully permeable. That helps a front garden manage surface water and meet the planning rule, and in most cases there is no need for a separate soakaway. When we install it correctly, the surface resists cracking, weed growth and movement. The same finish also suits patios and garden paths. For every drive surface we lay across Lincolnshire, see our county driveways page.

Resin Driveways We Lay Around Gainsborough

Every resin-bound driveway we lay in Gainsborough is mixed on site and trowelled by hand. Most jobs fall into one of the following types.

Resin Driveways On A New Sub-Base In Gainsborough

Most new resin driveways in Gainsborough start with the old surface dug out completely. We then lay a correctly specified sub-base and finish with a solid, flat base for the resin.

Overlaying Sound Concrete Or Tarmac

An existing concrete or tarmac drive can take resin-bound directly, provided it is sound, level and not moving. First, we look for cracks, hollow spots and standing water, then make good any failed sections and prime the surface.

Choosing Stone Colours And Blends

There is a wide choice of aggregate types and blends, from natural stone shades to more contemporary tones. Each one gives a smooth finish that stays slip-resistant underfoot.

Paths, Bin Storage Areas And Steps In Gainsborough

We carry the same resin-bound gravel on to garden paths, bin storage areas and step treads. That way the whole front of a Gainsborough property reads as one continuous surface.

Planning Rules For Front Gardens In Gainsborough

In England, surfacing a front garden over five square metres needs a permeable surface, or drainage to a lawn or border, to avoid needing planning permission. A permeable driveway in resin-bound meets this requirement, because rainwater passes down through the stone.

Failed Resin Surfaces And Repairs

Correctly installed resin-bound resists cracking, weeds and surface movement. When an older surface has failed, we start by assessing the base, then resurface it.

Block paving driveway laid in herringbone in Lincoln by Reshape Landscaping

Block Paving Or Resin In Gainsborough

Gainsborough homeowners ask about resin driveways and block paving more than any other drive surface. Blocks interlock into a load-bearing surface that copes with daily vehicle use, and one damaged block can lift out for repair. Resin-bound instead gives one continuous finish, with no joints and no loose stones.


Tarmac, blocks and resin all perform well in UK weather when they are laid correctly. What matters more is the drainage, the depth of the sub-base and the ground preparation. We agree the base at the site visit, before you pick a finish.


Because the binder is UV stable, a resin drive keeps its colour and does not yellow. The stone itself is natural, so its colour runs right through. We also bring samples to the site visit, so you can hold each blend against your brickwork before we order any materials.

Laying Resin Driveways In Gainsborough

Resin driveways in Gainsborough are laid in four stages, with the base checked before anything else.

1Base Check

An existing tarmac or concrete drive can take resin-bound if it is sound. If it is cracked or moving, it comes up and a new permeable base goes down instead.

2Choosing The Blend

We show you the aggregate colours, from natural stone tones to darker blends. The quote then sets out the base, edging and resin surface.

3Edging

A block or steel edge is fixed around the drive before any resin is laid, so the finished surface has a firm edge to lock against.

4Laying The Resin

The resin and aggregate are trowelled by hand into a smooth surface with no loose stone. Rainwater drains straight through it, so no separate drain is needed.

Grey resin driveway installation in Lincoln

Recent Driveway Jobs

Our own team lays every resin-bound driveway across Gainsborough. These are recent driveways we have built, each on a compacted sub-base.

  • Grey resin-bound driveway. Resin-bound surface laid over a prepared base for a smooth, permeable finish.
  • Block paving with driveway gates, Gainsborough. Block paved entrance with timber fencing and double wooden gates.
  • Herringbone block paving. Red and charcoal block paving in a herringbone pattern with grey edging stones.
  • Gravel driveway. Cream decorative gravel bordered with timber sleepers and block paving.

More driveway work is on our projects page.

Timber fencing with concrete posts and double wooden driveway gates installed on a block-paved entrance in Gainsborough, Lincolnshire, garden boundary and gate installation by garden landscapers in Gainsborough

What Customers Say About Our Work

“From the very first initial contact, comms were great, advice was great, we tweaked the design two times, but nothing was too much effort for them. Left them to carry out the work while i was out of the country, kept updated daily and checked with me about any minor changes that had to be implemented. A++++ 5 STAR. Highly recommend.”

Paul Brown, Google review


“I had RESHAPE LANDSCAPE to transform my tired and neglected garden and that is exactly what they did in just 2 1/2 days. I highly recommend this company.”

Linda Farrell, Google review


Read all of our Google reviews.

Grey resin driveway installation in Lincoln

The Base Under A Gainsborough Resin Drive

Our resin driveway installers in Gainsborough know the strength of a resin drive comes from the base below it, so we give the groundwork as much care as the trowelled finish. All the resin driveways we lay in Gainsborough go over an engineered sub-base built for the ground underneath. A resin drive laid this way improves kerb appeal and access.


We do not lay resin bonded surfaces, where loose stone goes over a coat of wet resin, because that is a different product. When a drive needs a new or wider dropped kerb, the application goes to Lincolnshire County Council before we book the work. We also advise on that application as part of the job. For a drive in block paving instead, see our driveways in Gainsborough page. Our main Gainsborough page lists every service we offer in the town, and we also lay resin driveways in Lincoln and Sleaford.

Why Gainsborough Homeowners Choose Reshape

When homeowners in Gainsborough compare resin driveway installers, these are the main reasons they choose Reshape Landscaping Ltd.

  • Established in 2010, with more than four hundred landscaping projects now completed across Gainsborough and Lincolnshire.
  • Holders of the Houzz 2026 Best of Service award, judged on customer feedback.
  • Every stage stays with our own team, from digging out and laying the sub-base to trowelling the finish.
  • Approved installers for Talasey Landscaping Solutions and Select Living Group.
  • Winners of the Midlands Enterprise Awards 2026 – Best Bespoke Garden Landscaping Service, Lincolnshire.
  • We hand-mix stone and resin together and trowel it over a base built for the ground, and we never lay resin bonded.
  • Winners of the Prestige Awards 2026 – Landscaper of the Year, Lincolnshire.
  • Fully insured resin driveway contractors, and every job in Gainsborough starts with a written quote covering each stage.
  • Lincoln based, with Gainsborough and the surrounding areas as part of our everyday working area.
Block paving driveway laid in herringbone in Lincoln by Reshape Landscaping

Areas We Cover Around Gainsborough

Resin-bound drives are surfaced throughout Gainsborough and the DN21 postcode, from the small front gardens of the Victorian and Edwardian terraces to the wider frontages on the newer estates at the edge of the town, and on into the surrounding areas.


Lea and Morton sit just outside the town, with Blyton, Laughton, Scotter, Scotton and Kirton in Lindsey to the north of Gainsborough. Corringham, Hemswell and Glentworth lie a short drive east of the town. Upton, Kexby, Willingham by Stow, Sturton by Stow and Stow lie to the south, between Gainsborough and Lincoln.


Our resin driveway installers also work in Lincoln and Sleaford, and the Gainsborough page lists the rest of our work in the town. For a resin driveway in Gainsborough or the surrounding areas, get in touch for a site visit and quote, or see all the areas we cover.

Request A Resin Driveway Quote In Gainsborough

Each resin driveway installation in Gainsborough begins with a consultation and a site visit, and we then provide a written quote covering every stage of the work.

Send us your postcode and a few photos of the garden using the form, or get in touch through our contact page. More of our finished work is also on our projects page.

We reply to every enquiry within 48 hours.

Our Other Services In Gainsborough

We cover Gainsborough, Lincoln, Scunthorpe, Sleaford and the surrounding areas. See all areas we cover.

Frequently Asked Questions

Does rainwater drain through a resin driveway?

Yes. A resin-bound surface stays fully permeable, so water drains naturally through it. That helps with surface water and supports sustainable drainage on a front garden.

It can, provided the concrete or tarmac is sound, level and not moving. Before we start, we look for cracks, hollow areas and standing water. We then repair any failed sections and prime the surface.

Not usually, as long as surface water drains within your own property. Resin-bound is permeable, so on a front garden it meets that requirement.

With resin bonded, loose stone goes over a coat of wet resin, and we do not lay it. Resin-bound mixes the stone and resin together, we trowel it by hand, and water drains through it.

The binder is UV stable, so it keeps its colour instead of yellowing. Because the aggregate is natural stone, the colour also runs through the full depth.

Send your postcode and a few photos through the contact page. We cover Gainsborough and the surrounding areas, and we will then arrange a site visit to take measurements.